Certified Restorative & Endodontic Solutions for Professional Dental Practice
FABPACK™ — Light Cure Bulk Fill Composite Filling Material
FABPACK™ — Light Cure Bulk Fill Composite Filling Material
FABPACK™ is a light-cured, radiopaque composite material formulated with glass fillers for adhesive tooth filling procedures. It features an advanced chameleon effect that matches natural tooth shades seamlessly while offering high polishability and luster.
Quick Application Guide
Preparation: Minimal-invasive cavity prep; isolate the tooth (rubber dam recommended).
Etch & Bond: Condition with FABETCH™ and bond with FAB7G™ or 5th Gen Bond.
Placement: Dispense FABPACK™ in layers (max. 4 mm) directly into cavity.
Curing: Light cure each layer for 20 seconds using a curing unit (350–500 nm).
Finishing: Trim and polish immediately using finishing diamonds and silicone polishers.
Key Features & Benefits
Chameleon Effect: Blends with natural tooth shades.
Radiopaque Glass Filler: Clear visibility on dental radiographs.
Bulk Placement: Supports layer thicknesses up to 4 mm.
High Polishability: Polishes quickly to a high luster finish.
Clinical Indications
Direct restorations (Class I & Class II), including occlusal surfaces.
Core build-ups.
Splinting procedures.
Indirect restorations.
FABFLOW™ — Light Cure Flowable Composite Filling Material
FABFLOW™ — Light Cure Flowable Composite Filling Material
FABFLOW™ is a light-cured flowable composite integrated with radiopaque glass fillers. Designed for precision application in tight or hard-to-reach cavity margins, it provides smooth flow without introducing air bubbles and matches natural tooth shade structures.
Quick Application Guide
Preparation: Clean and prepare cavity minimal-invasively; apply rubber dam.
Etch & Bond: Etch with FABETCH™ and apply adhesive (FAB7G™).
Dispensing: Apply FABFLOW™ in max 4 mm layers using the disposable curved tip.
Curing: Light cure for 20 seconds per layer (350–500 nm).
Key Features & Benefits
Optimized Flowability: Reaches cavity margins and micro-cavities effortlessly.
Chameleon Shade Adaptation: Blends into natural tooth structure.
Radiopaque Properties: Ensures easy diagnostic tracking.
Precision Needles: Comes with curved application tips for controlled placement.
Clinical Indications
Cavity lining / first (bottom) layer in Black’s Class I & Class II cavities.
Fillings up to 4 mm thickness in Class I & II cavities.
Class III and Class V restorations.
Post root canal filling sealing.
FAB7G™ — 7th Generation Self-Etch Composite Bonding Agent
FAB7G™ — 7th Generation Self-Etch Composite Bonding Agent
FAB7G™ is a 7th Generation self-etching adhesive that combines etching, priming, and bonding agents into a single bottle. It eliminates separate etching and rinsing steps, simplifying chairside workflows while maintaining high bond strength.
Quick Application Guide
Prep & Shake: Isolate tooth; shake FAB7G™ bottle for 10–20 seconds.
Apply: Apply 2–3 consecutive coats to enamel and dentine for 15–20 seconds with gentle agitation.
Air Thin: Gently air thin for 5 seconds to evaporate solvents.
Cure: Light cure for 20 seconds before placing restorative composite.
Key Features & Benefits
Single-Bottle System: Combines etch, prime, and bond in one step.
Time-Saving: Reduces patient chairside time and procedural complexity.
Reduced Sensitivity: Formulated to minimize post-operative sensitivity.
Universal Compatibility: Designed for light-cured direct composite restorations.
Clinical Indications
Indicated for all direct light-cure composite restorations (enamel and dentine).
FABETCH™ — 37% Phosphoric Acid Etching Gel
FABETCH™ — 37% Phosphoric Acid Etching Gel
FABETCH™ is a stable 37% phosphoric acid etching gel designed for precise dentine conditioning and enamel etching. Its thixotropic formula ensures the gel stays in place without slumping or running onto surrounding soft tissue.
Quick Application Guide
Dispense: Apply FABETCH™ gel onto enamel and dentine using the provided application needle or brush.
Action Time: Leave in place for 15 seconds.
Rinse & Dry: Rinse thoroughly with water spray; dry with oil-free air until surface appears chalky-white.
Key Features & Benefits
37% Phosphoric Acid: Optimal etching concentration.
Thixotropic Gel: Stays exactly where placed without slumping.
Non-Drying Formulation: Will not thicken or dry inside the syringe.
Visual Control: Leaves a distinct chalky-white etched pattern upon drying.
Clinical Indications
Direct composite restorations.
Pit & fissure sealant application.
Indirect restorations (composite or metal-free ceramics with adhesive cements).
Bonding orthodontic brackets.
FABRCGLIDE™ — Lubricating EDTA Paste with Carbamide Peroxide
FABRCGLIDE™ — Lubricating EDTA Paste with Carbamide Peroxide
FABRCGLIDE™ is an EDTA paste formulated for biomechanical root canal preparation. It chelates dentin, lubricates endodontic instruments, and contains carbamide peroxide to release oxygen during sodium hypochlorite irrigation. Formulated 100% silica-free, it rinses out completely without leaving stubborn residues in the canal.
Quick Application Guide
Apply: Dispense directly into the pulpal chamber via needle or carry into the canal using an endodontic instrument.
Instrument: Proceed with mechanical instrumentation in the lubricated canal.
Flush: Rinse thoroughly with Sodium Hypochlorite or distilled water after completion.
Key Features & Benefits
100% Silica-Free: Prevents hard-to-rinse silica residue from blocking root canals.
Instrument Lubrication: Prevents file binding and breakage during instrumentation.
Active Effervescence: Carbamide peroxide releases oxygen when reacting with Sodium Hypochlorite to clean canal debris.
Bio-Friendly Chelation: Softens canal walls by chelating dentin for easier shaping.
Clinical Indications
Cleaning, chelation, and lubrication during biomechanical preparation of root canals.
Frequently Asked Questions
Find quick answers regarding our product formulations, technical specifications, storage guidelines, and clinical applications.
FABRCGLIDE™ is 100% silica-free, making it easy to rinse out completely from root canals without leaving residue.
Both the composites are best suitable for bulk filling. special in post root canal filling.
No, FAB7G™ is a 7th Generation self-etching adhesive that combines etching, priming, and bonding in a single bottle.
FABETCH™ contains 37% phosphoric acid in a stable, non-slumping thixotropic gel formulation.
Both composites should be placed in increments with a maximum thickness of 4 mm per layer.
It releases oxygen when reacting with Sodium Hypochlorite irrigation, generating effervescence to clean canal debris.
Yes, its thixotropic gel stays precisely where placed and rinses off cleanly with water spray without leaving any residue.
Yes, FABFLOW™ features high flowability and self-leveling properties, making it ideal as a stress-absorbing liner or base under restorations.
Its self-etching chemistry seals dentinal tubules simultaneously during priming, preventing fluid movement and microleakage.
Yes, FABPACK™ and FABFLOW™ are fully compatible with standard methacrylate-based light-curing bonding systems.
Newsletter Updates
Enter your email address below to subscribe to our tasty newsletter